Notifications
Clear all

COOLER MASTER Storm Scout  

  RSS
Jester
(@jester)
Member Moderator
Quote:
Specifications: 19.2" x 8.6" x 19.5"

The Antec 902 has the following measurements: 19.4" x 8.6" x 18.6"

The Antec 900 has the following measurements: 19.4" x 8.1'' x 18.4"

So the Storm Scout and 902 are the widest, however the Storm Scout is the shortest in length by .2 inches. It is also the tallest. The Storm Sniper doesn't even fit into the mid tower category very well.

COOLER MASTER Storm Sniper: 22" x 10" x 21.7"

^^They call that a mid tower case. It is bigger than the Antec 1200 which is a full tower (overall), but internally it may be a bit smaller. I know internally it is smaller than the HAF 932.

Antec 1200: 22.9" x 8.4" x 20.2"

COOLER MASTER HAF 932: 22.7" x 9" x 21.5"

Antec 900 MSRP: $109.99
Antec 902 MSRP: $159.99
Antec 1200 MSRP: $179.99
COOLER MASTER Storm Scout MSRP: $109.99
COOLER MASTER Storm Sniper MSRP: $149.99
COOLER MASTER HAF 932 MSRP: $159.99

Small comparison of all the above cases.

Antec 900/902:

  • Front: 2x 120mm Blue LED Intake Fans (Included)[/*:m:3wpcbinv]
  • Side: 1x 120mm Fan (Optional - use as intake)[/*:m:3wpcbinv]
  • Bottom: N/A[/*:m:3wpcbinv]
  • Top: 1x 200mm Blue LED Exhaust Fan[/*:m:3wpcbinv]
  • Rear: 1x 120mm Blue LED Exhaust Fan[/*:m:3wpcbinv]
  • Bottom mounted PSU (face PSU fan up since there is no bottom intake)[/*:m:3wpcbinv]
  • Antec 902 Only: 8 expansion slots[/*:m:3wpcbinv]
  • Tool free hard drive installation [/*:m:3wpcbinv]
  • Two holes to route water cooling (on rear next to I/O panel)[/*:m:3wpcbinv]
  • MSRP: $109.99 (Antec 900) / $159.99 (Antec 902)[/*:m:3wpcbinv]

Antec 1200:

  • Front: 3x 120mm Blue LED Intake Fans (Included)[/*:m:3wpcbinv]
  • Side: 1x 120mm Fan (Optional - use as intake)[/*:m:3wpcbinv]
  • Bottom: N/A[/*:m:3wpcbinv]
  • Top: 1x 200mm Blue LED Exhaust Fan (Included)[/*:m:3wpcbinv]
  • Rear: 2x 120mm Blue LED Exhaust Fans (Included)[/*:m:3wpcbinv]
  • Bottom mounted PSU (face PSU fan up since there is no bottom intake)[/*:m:3wpcbinv]
  • Tool free hard drive installation[/*:m:3wpcbinv]
  • Two holes to route water cooling (on rear next to I/O panel)[/*:m:3wpcbinv]
  • MSRP: $179.99[/*:m:3wpcbinv]

COOLER MASTER Storm Scout:

  • Front: 1x 140mm Red LED Intake Fan (Included)[/*:m:3wpcbinv]
  • Side: 2x 120mm Fans (Optional - use as intake)[/*:m:3wpcbinv]
  • Bottom: Air Vent[/*:m:3wpcbinv]
  • Top: 1x 140mm Exhaust Fan (Included)[/*:m:3wpcbinv]
  • Rear: 1x 120mm Red LED Exhaust Fan (Included)[/*:m:3wpcbinv]
  • Bottom mounted PSU (face PSU fan down since there is a bottom intake)[/*:m:3wpcbinv]
  • Tool free hard drive installation[/*:m:3wpcbinv]
  • Tool free expansion slots[/*:m:3wpcbinv]
  • Cut outs in mainboard tray for easier CPU cooler installation and easier cable management[/*:m:3wpcbinv]
  • Two holes to route water cooling (on rear above 120mm fan and I/O panel)[/*:m:3wpcbinv]
  • "Stealth" option (disables LEDs on fans - very nice!)[/*:m:3wpcbinv]
  • MSRP: $109.99[/*:m:3wpcbinv]

COOLER MASTER Storm Sniper:

  • Front: 1x 200mm Blue LED Intake Fan (Included)[/*:m:3wpcbinv]
  • Side: 1x 200mm Fan (Optional - use as intake)[/*:m:3wpcbinv]
  • Bottom: 1x 120mm Fan (Optional - use as intake) & Air Vent[/*:m:3wpcbinv]
  • Top: 1x 200mm Blue LED Exhaust Fan (Included) [/*:m:3wpcbinv]
  • Rear: 1x 120mm Exhaust Fan (Included)[/*:m:3wpcbinv]
  • Bottom mounted PSU (face PSU fan down since there is a bottom intake)[/*:m:3wpcbinv]
  • Tool free hard drive installation[/*:m:3wpcbinv]
  • Tool free meshed expansion slots[/*:m:3wpcbinv]
  • Cut outs on mainboard tray for easier CPU cooler installation and easier cable management[/*:m:3wpcbinv]
  • Anti-vibration slide-out PSU tray[/*:m:3wpcbinv]
  • Two holes to route water cooling (on rear above 120mm fan and I/O panel)[/*:m:3wpcbinv]
  • 200mm fan control at your finger tips (right on the top of the case)[/*:m:3wpcbinv]
  • Stability feet can be turned outwards for even greater stability[/*:m:3wpcbinv]
  • MSRP: $149.99[/*:m:3wpcbinv]

COOLER MASTER HAF 932:

  • Front: 1x 230mm Red LED Intake Fan (Included)[/*:m:3wpcbinv]
  • Side: 1x 230mm Intake Fan (Included, 4x 120mm fan can be put in it's place)[/*:m:3wpcbinv]
  • Bottom: 1x 120mm Fan (Optional - use as intake) & Air Vent[/*:m:3wpcbinv]
  • Top: 1x 230mm Exhaust Fan (Included, 2x 120mm fan can be put in it's place or a double 120mm radiator)[/*:m:3wpcbinv]
  • Rear: 1x 140mm Exhaust Fan (Included)[/*:m:3wpcbinv]
  • Bottom or top mounted PSU (PSU should be mounted on the bottom with the fan facing down since there is a bottom intake)[/*:m:3wpcbinv]
  • Tool free hard drive installation[/*:m:3wpcbinv]
  • Tool free meshed expansion slots[/*:m:3wpcbinv]
  • Cut outs on mainboard tray for easier CPU cooler installation and easier cable management[/*:m:3wpcbinv]
  • Anti-vibration slide-out PSU tray[/*:m:3wpcbinv]
  • Two holes to route water cooling (on the top where the PSU can be mounted)[/*:m:3wpcbinv]
  • Top mounted liquid coolant port/reservoir [/*:m:3wpcbinv]
  • MSRP: $159.99[/*:m:3wpcbinv]
Quote
Posted : 20/03/2009 7:30 pm
Share: